Specifications

Modem Operation

Line Rate: 0.3, 1.2, 2.4, 4.8, 7.2, 9.6, 12, 14.4, 16.8, 19.2, 21.6, 24, 26.4, 28.8, 31.2, 33.6, 56Kbps*
DTE Rate: Virtual DTE, 460.8Kbps maximum
Operation: Half or full-duplex over 2-wire dial-up line
Asynchronous Linking: Auto dial / answer, auto bauding, MNP10 auto fall-back/forward
Flow Control: RTS/CTS, XON/XOFF (software selectable)
Compatibility: Bell 103; 212A, ITU-T V.21; V.22A/B; V.23; V.22bis; V.32; V.32bis; V.34; K56Flex; V.90;
Error Correction: ITU-T V.42, MNP4 (auto-match)
Data Compression: ITU-T V.42bis, MNP5 (auto-match)
Receive Sensitivity: -37 dBm
Command Set: AT command and Escape sequence
LED: TR: ( Transmission: Data Access ) OH: ( Off-Hook: Line Seize )

Voice Operation

Operation: Telephone Answering Machine (TAM); voice mail system
Voice decode: ADPCM
FDSP: Acoustic and line echo cancellation, microphone gain / muting, speaker volume control / muting

FAX Operation

Speed: Up to 14400 bps Supports Group 3 fax requirements.
Compatibility: Group 3 with T.30 protocol over ITU V.17; V.21 ch2; V.27ter; V.29
Command Set: TR-29 Class 1

General Specification

Modem Kernal: SmartLink
ST USB Interface Solution
Up to 56K Data (download), V.34 speed send data
Standard AT Command
Fax Support up to 14.4K (Group 3 support)
V.8 and AutoMode
2 RJ-11 phone jacks for telephone line and handset
Voice Answering Machine and ADPCM voice compression/decompression

System Minimum Requirments:

CPU:
- Pentium 166 MHz MMX or higher ( Pentium 233 MMX required for V.80/Video Phone )
- AMD K6-200 MHz or higher
- Cyrix 6x86MX PR200 or higher
Memory: 32 MB or more
Operation System: Windows 95/98